 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 74VCX16821 Low Voltage 20-Bit D-Type Flip-Flops with 3.6V Tolerant Inputs and Outputs March 1998 Revised October 2004 74VCX16821 Low Voltage 20-Bit D-Type Flip-Flops with 3.6V Tolerant Inputs and Outputs General Description The VCX16821 contains twenty non-inverting D-type flipflops with 3-STATE outputs and is intended for bus oriented applications. The 74VCX16821 is designed for low voltage (1.4V to 3.6V) VCC applications with I/O compatibility up to 3.6V. The 74VCX16821 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining low CMOS power dissipation. Features s 1.4V to 3.6V VCC supply operation s 3.6V tolerant inputs and outputs s tPD 3.5 ns max for 3.0V to 3.6V VCC s Power-off high impedance inputs and outputs s Supports live insertion and withdrawal (Note 1) s Static Drive (IOH/IOL) 24 mA @ 3.0V VCC s Uses patented noise/EMI reduction circuitry s Latch-up performance exceeds 300 mA s ESD performance: Human body model > 2000V Machine model > 200V Note 1: To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver. Ordering Code: Order Number 74VCX16821MTD Package Number MTD56 Package Descriptions 56-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Device also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering code. Logic Symbol Pin Descriptions Pin Names OEn CLKn D0-D19 O0-O19 Description Output Enable Input (Active LOW) Clock Input Inputs Outputs (c) 2004 Fairchild Semiconductor Corporation DS500130 www.fairchildsemi.com 74VCX16821 Connection Diagram Truth Tables Inputs CLK1 OE1 H L L L Inputs CLK2 OE2 H L L L D10-D19 X L H X D0-D9 X L H X Outputs O0-O9 Z L H O0 Outputs O10-O19 Z L H O0 L or H X L or H X H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial (HIGH or LOW, inputs may not float) Z = High Impedance O0 = Previous O0 before LOW-to-HIGH transition of Clock = LOW-to-HIGH transition Functional Description The VCX16821 contains twenty D-type flip-flops with 3-STATE standard outputs. The device is byte controlled with each byte functioning identically, but independent of each other. Control pins can be shorted together to obtain full 20-bit operation. The following description applies to each byte. The twenty flip-flops will store the state of their individual D-type inputs that meet the setup and hold time requirements on the LOW-to-HIGH Clock (CLK) transition. The 3-STATE standard outputs are controlled by the Output Enable (OEn) input. When OEn is HIGH, the standard outputs are in the high impedance mode but this does not interfere with entering new data into the flip-flops. Logic Diagrams Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. www.fairchildsemi.com 2 74VCX16821 Absolute Maximum Ratings(Note 2) Supply Voltage (VCC) DC Input Voltage (VI) Output Voltage (VO) Outputs 3-STATE Outputs Active (Note 3) DC Input Diode Current (IIK) VI < 0V DC Output Diode Current (IOK) VO < 0V VO > VCC DC Output Source/Sink Current (IOH/IOL) DC VCC or GND Current per Supply Pin (ICC or GND) Storage Temperature Range (TSTG) -0.5V to +4.6V -0.5V to +4.6V -0.5V to +4.6V -0.5V to VCC + 0.5V -50 mA -50 mA +50 mA 50 mA 100 mA -65C to +150C Recommended Operating Conditions (Note 4) Power Supply Operating Input Voltage Output Voltage (VO) Output in Active States Output in 3-STATE Output Current in IOH/IOL VCC = 3.0V to 3.6V VCC = 2.3V to 2.7V VCC = 1.65V to 2.3V VCC = 1.4V to 1.6V Free Air Operating Temperature (TA) Minimum Input Edge Rate (t/V) VIN = 0.8V to 2.0V, VCC = 3.0V 10 ns/V Note 2: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The "Recommended Operating Conditions" table will define the conditions for actual device operation. Note 3: IO Absolute Maximum Rating must be observed. Note 4: Floating or unused inputs must be held HIGH or LOW. 1.4V to 3.6V -0.3V to +3.6V 0V to VCC 0.0V to 3.6V 24 mA 18 mA 6 mA 2 mA -40C to +85C DC Electrical Characteristics Symbol VIH Parameter HIGH Level Input Voltage Conditions VCC (V) 2.7 - 3.6 2.3 - 2.7 1.65 - 2.3 1.4 - 1.6 VIL LOW Level Input Voltage 2.7 - 3.6 2.3 - 2.7 1.65 - 2.3 1.4 - 1.6 VOH HIGH Level Output Voltage IOH = -100 A IOH = -12 mA IOH = -18 mA IOH = -24 mA IOH = -100 A IOH = -6 mA IOH = -12 mA IOH = -18 mA IOH = -100 A IOH = -6 mA IOH = -100 A IOH = -12 mA 2.7 - 3.6 2.7 3.0 3.0 2.3 - 2.7 2.3 2.3 2.3 1.65 - 2.3 1.65 1.4 - 1.6 1.4 VCC - 0.2 2.2 2.4 2.2 VCC - 0.2 2.0 1.8 1.7 VCC - 0.2 1.25 VCC - 0.2 1.05 V Min 2.0 1.6 0.65 x VCC 0.65 x VCC 0.8 0.7 0.35 x VCC 0.35 x VCC V V Max Units 3 www.fairchildsemi.com 74VCX16821 DC Electrical Characteristics Symbol VOL Parameter LOW Level Output Voltage (Continued) VCC (V) 2.7 - 3.6 2.7 3.0 3.0 2.3 - 2.7 2.3 2.3 1.65 - 2.3 1.65 1.4 - 1.6 1.4 1.4 - 3.6 1.4 - 3.6 0 1.4 - 3.6 1.4 - 3.6 2.7 - 3.6 Conditions IOL = 100 A IOL = 12 mA IOL = 18 mA IOL = 24 mA IOL = 100 A IOL = 6 mA IOL = 12 mA IOL = 100 A IOL = 6 mA IOL = 100 A IOL = 2 mA Min Max 0.2 0.4 0.4 0.55 0.2 0.4 0.6 0.2 0.3 0.2 0.35 5.0 10 10 20 20 750 Units V II IOZ IOFF ICC ICC Input Leakage Current 3-STATE Output Leakage Power-OFF Leakage Current Quiescent Supply Current Increase in ICC per Input 0 VI 3.6V 0 VO 3.6V VI = VIH or VIL 0 (VI, VO) 3.6V VI = VCC or GND VCC (VI, VO) 3.6V (Note 5) VIH = VCC -0.6V A A A A A Note 5: Outputs disabled or 3-STATE only. www.fairchildsemi.com 4 74VCX16821 AC Electrical Characteristics (Note 6) Symbol fMAX Parameter Maximum Clock Frequency Conditions CL = 30 pF, RL = 500 VCC (V) 3.3 0.3 2.5 0.2 1.8 0.15 CL = 15 pF, RL = 500 tPHL tPLH CL = 15 pF, RL = 500 tPZL tPZH CL = 15 pF, RL = 500 tPLZ tPHZ CL = 15 pF, RL = 500 tS Setup Time CL = 30 pF, RL = 500 Output Disable Time CL = 30 pF, RL = 500 Output Enable Time CL = 30 pF, RL = 500 Propagation Delay CL = 30 pF, RL = 500 1.5 0.1 3.3 0.3 2.5 0.2 1.8 0.15 1.5 0.1 3.3 0.3 2.5 0.2 1.8 0.15 1.5 0.1 3.3 0.3 2.5 0.2 1.8 0.15 1.5 0.1 3.3 0.3 2.5 0.2 1.8 0.15 CL = 15 pF, RL = 500 tH Hold Time CL = 30 pF, RL = 500 1.5 0.1 3.3 0.3 2.5 0.2 1.8 0.15 CL = 15 pF, RL = 500 tW Pulse Width CL = 30 pF, RL = 500 1.5 0.1 3.3 0.3 2.5 0.2 1.8 0.15 CL = 15 pF, RL = 500 tOSHL tOSLH Output to Output Skew (Note 7) CL = 15 pF, RL = 500 Note 6: For CL = 50 PF, add approximately 300 ps to the AC maximum specification. Note 7: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH). TA = -40C to +85C Min 250 200 100 80.0 0.8 1.0 1.5 1.0 0.8 1.0 1.5 1.0 0.8 1.0 1.5 1.0 1.5 1.5 2.5 3.0 1.0 1.0 1.0 2.0 1.5 1.5 4.0 4.0 0.5 0.5 0.75 1.5 3.5 4.4 8.8 17.6 3.7 4.7 9.8 19.6 3.7 4.2 7.6 15.2 Max Units Figure Number MHz ns Figures 1, 2 Figures 7, 8 Figures 1, 3, 4 Figures 7, 9, 10 Figures 1, 3, 4 Figures 7, 9, 10 ns ns ns Figure 6 ns Figure 6 ns Figure 5 1.5 0.1 3.3 0.3 2.5 0.2 1.8 0.15 1.5 0.1 CL = 30 pF, RL = 500 ns 5 www.fairchildsemi.com 74VCX16821 Dynamic Switching Characteristics Symbol VOLP Parameter Quiet Output Dynamic Peak VOL Conditions CL = 30 pF, VIH = VCC, VIL = 0V VCC (V) 1.8 2.5 3.3 VOLV Quiet Output Dynamic Valley VOL CL = 30 pF, VIH = VCC, VIL = 0V 1.8 2.5 3.3 VOHV Quiet Output Dynamic Valley VOH CL = 30 pF, VIH = VCC, VIL = 0V 1.8 2.5 3.3 TA = +25C Typical 0.25 0.6 0.8 -0.25 -0.6 -0.8 1.5 1.9 2.2 V V V Units Capacitance Symbol CIN COUT CPD Input Capacitance Output Capacitance Power Dissipation Capacitance Parameter Conditions VCC = 1.8V, 2.5V or 3.3V, VI = 0V or VCC VI = 0V or VCC, VCC = 1.8V, 2.5V or 3.3V VI = 0V or VCC, f = 10 MHz, VCC = 1.8V, 2.5V or 3.3V TA = +25C Typical 6 7 20 Units pF pF pF www.fairchildsemi.com 6 74VCX16821 AC Loading and Waveforms (VCC 3.3V 0.3V to 1.8V 0.15V) TEST tPLH, tPHL tPZL, tPLZ tPZH, tPHZ SWITCH Open 6V at VCC = 3.3V 0.3V; VCC x 2 at VCC = 2.5V 0.2V; 1.8V 0.15V GND FIGURE 1. AC Test Circuit FIGURE 2. Waveform for Inverting and Non-Inverting Functions FIGURE 3. 3-STATE Output High Enable and Disable Times for Low Voltage Logic FIGURE 4. 3-STATE Output Low Enable and Disable Times for Low Voltage Logic FIGURE 5. Propagation Delay, Pulse Width and trec Waveforms Symbol Vmi Vmo VX VY FIGURE 6. Setup Time, Hold Time and Recovery Time for Low Voltage Logic VCC 3.3V 0.3V 1.5V 1.5V VOL + 0.3V VOH - 0.3V 2.5V 0.2V VCC/2 VCC/2 VOL + 0.15V VOH - 0.15V 1.8V 0.15V VCC/2 VCC/2 VOL + 0.15V VOH - 0.15V 7 www.fairchildsemi.com 74VCX16821 AC Loading and Waveforms (VCC 1.5V 0.1V) TEST tPLH, tPHL tPZL, tPLZ tPZH, tPHZ SWITCH Open VCC x 2 at VCC = 1.5V 0.1V GND FIGURE 7. AC Test Circuit FIGURE 8. Waveform for Inverting and Non-Inverting Functions FIGURE 9. 3-STATE Output High Enable and Disable Times for Low Voltage Logic FIGURE 10. 3-STATE Output Low Enable and Disable Times for Low Voltage Logic Symbol Vmi Vmo VX VY VCC 1.5V 0.1V VCC/2 VCC/2 VOL + 0.1V VOH - 0.1V www.fairchildsemi.com 8 74VCX16821 Low Voltage 20-Bit D-Type Flip-Flops with 3.6V Tolerant Inputs and Outputs Physical Dimensions inches (millimeters) unless otherwise noted 56-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Package Number MTD56 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 9 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com www.fairchildsemi.com |
Price & Availability of 74VCX16821MTDX
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |